Shoelaces for Nike Dunk Low

Start with 55 inch Spiffy laces for Nike Dunk Low, then check the actual eyelet count and lacing route before ordering. Start with 55 inch for six or seven pairs. Compare 45 inch for a compact shoe and minimal bow only after measuring; using the top pair or tying a double knot can consume the spare length.

Typical eyelet pairs: 6–7

Some replacement guides count six used pairs while others count seven including the top pair. This is a reason to distinguish holes present from holes you actually thread. Eyelet counts vary by size and release: count the holes on one side of your own shoe, and count only the pairs you will lace.

Retailer sizing reference · Comparison reference. These are sizing estimates, not a manufacturer guarantee.

Three ways to measure Nike Dunk Low laces

1. Measure the original lace

Remove one lace, lay it flat and measure end to end including the tips. Keep that length if its bow fits; if not, compare the next Spiffy size rather than assuming the original is right.

2. Count the pairs you use

Count one side of one shoe. Use 30 inch for 2–3 pairs, 45 for 4–5, 55 for 6–7 or 65 for 8–10 as starting points; eyelet spacing and your bow can change the result.

3. Thread string through your route

Lace a piece of string exactly as you wear the shoe, include enough at each end for the bow, then remove and measure it. This catches skipped pairs, heel-lock loops and unusual spacing that a model-name chart misses.

Check the adjacent length

Compare 45 inch as well as 55 inch. Double knots, large bows, straight-bar or ladder lacing and US men’s 12+ can require more; skipped pairs or tucked ends can require less. Do not buy 65 inch if your measured route needs more than our longest size.

Shop 55 inch laces · Compare 45 inch laces

Main shoelace length chart · Lacing styles