Shoelaces for Nike Air Force 1

Start with 55 inch Spiffy laces for Nike Air Force 1, then check the actual eyelet count and lacing route before ordering. 55 inch is a starting point for a Low with six or seven used pairs. At eight pairs, or for a longer Mid/High route, compare 65 inch; for a compact six-pair setup compare 45 inch after measuring.

Typical eyelet pairs: 6–8

Replacement-lace guides conflict on the Low’s count, and Mid and High shoes add another sizing question. Count the holes rather than treating Air Force 1 as a single lacing layout. Eyelet counts vary by size and release: count the holes on one side of your own shoe, and count only the pairs you will lace.

Retailer sizing reference · Comparison reference. These are sizing estimates, not a manufacturer guarantee.

Three ways to measure Nike Air Force 1 laces

1. Measure the original lace

Remove one lace, lay it flat and measure end to end including the tips. Keep that length if its bow fits; if not, compare the next Spiffy size rather than assuming the original is right.

2. Count the pairs you use

Count one side of one shoe. Use 30 inch for 2–3 pairs, 45 for 4–5, 55 for 6–7 or 65 for 8–10 as starting points; eyelet spacing and your bow can change the result.

3. Thread string through your route

Lace a piece of string exactly as you wear the shoe, include enough at each end for the bow, then remove and measure it. This catches skipped pairs, heel-lock loops and unusual spacing that a model-name chart misses.

Check the adjacent length

Compare 65 inch as well as 55 inch. Double knots, large bows, straight-bar or ladder lacing and US men’s 12+ can require more; skipped pairs or tucked ends can require less. Do not buy 65 inch if your measured route needs more than our longest size.

Shop 55 inch laces · Compare 65 inch laces

Main shoelace length chart · Lacing styles